이런식으로 계속 EDL로 진입을 못하는 문제가 발생해서 해당 메시지 나왔을때 케이블 연결 해제 후 재시작 - 태블릿 전원 OFF 이후 다시 연결 시도함
EDL 상태로 진입 후 이런 내용 나옴
혹시나 싶어 데이터 전송이 가능한 다른 케이블로 시도, 이번에는 EDL 진입은 쉽게 되지만 Firehose 프로그래머 어쩌고 하는 문제 발생하여 에러가 남..
로그나 이런거 확인해보면 내 컴퓨터의 포트 문제일수도 있는거 같은데.. 평소 이것저것 많이 하는 편인데 왜 이것만 안되는 건지....
아래는 추가로그
--- [STEP 1/9] Cleaning up previous output folders ---
> Removed: output
> Removed: output_xml
--- [WIPE MODE] Starting Automated Install & Flash ROW Firmware Process ---
=============================================================
STEP 2/9: Waiting for ADB/Fastboot Connection & Getting Device Info
=============================================================
--- WAITING FOR ADB DEVICE ---
[!] Please enable USB Debugging on your device, connect it via USB.
[!] A 'Allow USB debugging?' prompt will appear on your device.
[!] Please check 'Always allow from this computer' and tap 'OK'.
[+] ADB device connected.
[*] Getting device model via ADB...
[+] Found device model: TB520FU
[*] Getting active slot suffix via ADB...
[+] Found active slot suffix: _a
--- [STEP 2/9] Device Info Check SUCCESS ---
[*] Device will boot back to system if needed. Waiting for ADB connection again...
--- WAITING FOR ADB DEVICE ---
[!] Please enable USB Debugging on your device, connect it via USB.
[!] A 'Allow USB debugging?' prompt will appear on your device.
[!] Please check 'Always allow from this computer' and tap 'OK'.
[+] ADB device connected.
[+] ADB device connected.
--- [STEP 3/9] Waiting for RSA Firmware 'image' folder ---
[+] 'image' folder found.
=============================================================
STEP 4/9: Converting Firmware (PRC to ROW) & Validating Model
=============================================================
--- Checking for required files ---
[+] All dependencies are present.
--- Starting vendor_boot & vbmeta conversion process ---
[*] Cleaning up old folders...
--- Waiting for vendor_boot.img and vbmeta.img ---
--- Backing up original images ---
[+] Backup complete.
--- Starting PRC/ROW Conversion ---
Found '49524F57' pattern 4 time(s). Replacing...
Patch successful! Total 4 instance(s) replaced.
Saved as 'vendor_boot_prc.img'
[*] Verifying conversion result...
[+] Conversion to PRC successful.
--- Extracting image information ---
[Info] Parsed Flags: 0
[Info] Parsed 13 properties.
[Info] Parsed Flags: 0
[Info] Parsed 1 properties.
[+] Information extracted.
[*] Validating firmware against device model 'TB520FU'...
> Found firmware fingerprint: Lenovo/TB520FU/TB520FU:14/UKQ1.240826.001/ZUI_17.5.10.036_251023_ROW:user/release-keys
[+] Success: Device model 'TB520FU' found in firmware fingerprint.
--- Adding Hash Footer to vendor_boot ---
[+] Restoring 1 properties for vendor_boot.
[+] Restoring flags for vendor_boot: 0
--- Remaking vbmeta.img ---
[*] Verifying vbmeta key...
[+] Matched testkey_rsa4096.pem.
[*] Remaking 'vbmeta.img' using descriptors from backup...
--- Finalizing ---
[*] Renaming final images...
[*] Moving final images to 'output' folder...
[*] Moving backup files to 'backup' folder...
=============================================================
SUCCESS!
Final images have been saved to the 'output' folder.
=============================================================
--- [STEP 4/9] Firmware Conversion & Validation SUCCESS ---
=============================================================
STEP 5/9: Modifying XML Files
=============================================================
--- Starting XML Modification Process ---
--- Waiting for 'image' folder ---
[*] Created temporary 'working' folder.
[*] Scanning files in 'image' folder...
[*] Found 28 .x files. Decrypting to 'output_xml'...
Successfully decrypted.
71477
bytes
> Decrypted: contents.x -> contents.xml
Successfully decrypted.
6263
bytes
> Decrypted: patch0.x -> patch0.xml
Successfully decrypted.
6263
bytes
> Decrypted: patch1.x -> patch1.xml
Successfully decrypted.
6263
bytes
> Decrypted: patch2.x -> patch2.xml
Successfully decrypted.
6263
bytes
> Decrypted: patch3.x -> patch3.xml
Successfully decrypted.
6275
bytes
> Decrypted: patch4.x -> patch4.xml
Successfully decrypted.
6263
bytes
> Decrypted: patch5.x -> patch5.xml
Successfully decrypted.
3090
bytes
> Decrypted: provision_ufs40.x -> provision_ufs40.xml
Successfully decrypted.
5377
bytes
> Decrypted: rawprogram0.x -> rawprogram0.xml
Successfully decrypted.
497
bytes
> Decrypted: rawprogram0_BLANK_GPT.x -> rawprogram0_BLANK_GPT.xml
Successfully decrypted.
5912
bytes
> Decrypted: rawprogram0_WIPE_PARTITIONS.x -> rawprogram0_WIPE_PARTITIONS.xml
Successfully decrypted.
2478
bytes
> Decrypted: rawprogram1.x -> rawprogram1.xml
Successfully decrypted.
497
bytes
> Decrypted: rawprogram1_BLANK_GPT.x -> rawprogram1_BLANK_GPT.xml
Successfully decrypted.
2823
bytes
> Decrypted: rawprogram1_WIPE_PARTITIONS.x -> rawprogram1_WIPE_PARTITIONS.xml
Successfully decrypted.
2421
bytes
> Decrypted: rawprogram2.x -> rawprogram2.xml
Successfully decrypted.
497
bytes
> Decrypted: rawprogram2_BLANK_GPT.x -> rawprogram2_BLANK_GPT.xml
Successfully decrypted.
2824
bytes
> Decrypted: rawprogram2_WIPE_PARTITIONS.x -> rawprogram2_WIPE_PARTITIONS.xml
Successfully decrypted.
1859
bytes
> Decrypted: rawprogram3.x -> rawprogram3.xml
Successfully decrypted.
497
bytes
> Decrypted: rawprogram3_BLANK_GPT.x -> rawprogram3_BLANK_GPT.xml
Successfully decrypted.
2218
bytes
> Decrypted: rawprogram3_WIPE_PARTITIONS.x -> rawprogram3_WIPE_PARTITIONS.xml
Successfully decrypted.
22184
bytes
> Decrypted: rawprogram4.x -> rawprogram4.xml
Successfully decrypted.
497
bytes
> Decrypted: rawprogram4_BLANK_GPT.x -> rawprogram4_BLANK_GPT.xml
Successfully decrypted.
23545
bytes
> Decrypted: rawprogram4_WIPE_PARTITIONS.x -> rawprogram4_WIPE_PARTITIONS.xml
Successfully decrypted.
2410
bytes
> Decrypted: rawprogram5.x -> rawprogram5.xml
Successfully decrypted.
497
bytes
> Decrypted: rawprogram5_BLANK_GPT.x -> rawprogram5_BLANK_GPT.xml
Successfully decrypted.
2825
bytes
> Decrypted: rawprogram5_WIPE_PARTITIONS.x -> rawprogram5_WIPE_PARTITIONS.xml
Successfully decrypted.
10187
bytes
> Decrypted: rawprogram_save_persist_unsparse0.x -> rawprogram_save_persist_unsparse0.xml
Successfully decrypted.
10198
bytes
> Decrypted: rawprogram_unsparse0.x -> rawprogram_unsparse0.xml
[*] Modifying 'rawprogram_save_persist_unsparse0.xml'...
> [WIPE] Skipping metadata and userdata removal.
> Patched successfully.
[*] Cleaning up unnecessary files in output folder...
> Deleted: rawprogram0_BLANK_GPT.xml
> Deleted: rawprogram0_WIPE_PARTITIONS.xml
> Deleted: rawprogram1_BLANK_GPT.xml
> Deleted: rawprogram1_WIPE_PARTITIONS.xml
> Deleted: rawprogram2_BLANK_GPT.xml
> Deleted: rawprogram2_WIPE_PARTITIONS.xml
> Deleted: rawprogram3_BLANK_GPT.xml
> Deleted: rawprogram3_WIPE_PARTITIONS.xml
> Deleted: rawprogram4_BLANK_GPT.xml
> Deleted: rawprogram4_WIPE_PARTITIONS.xml
> Deleted: rawprogram5_BLANK_GPT.xml
> Deleted: rawprogram5_WIPE_PARTITIONS.xml
> Deleted: rawprogram_unsparse0.xml
[+] XML processing complete. All files are in 'output_xml'.
[*] Creating custom write XMLs for devinfo/persist...
[+] Created 'rawprogram_write_persist_unsparse0.xml' in 'output_xml'.
[+] Created 'rawprogram4_write_devinfo.xml' in 'output_xml'.
[*] Cleaned up temporary 'working' folder.
=============================================================
SUCCESS!
Modified XML files are ready in the 'output_xml'.
You can now run 'Flash EDL' (Menu 10).
=============================================================
--- [STEP 5/9] XML Modification SUCCESS ---
=============================================================
STEP 6/9: Dumping devinfo/persist for patching (fh_loader)
=============================================================
[*] Scheduled extra dumps for ARB check: boot_a, vbmeta_system_a
--- Starting Dump Process (fh_loader) ---
--- WAITING FOR ADB DEVICE ---
[!] Please enable USB Debugging on your device, connect it via USB.
[!] A 'Allow USB debugging?' prompt will appear on your device.
[!] Please check 'Always allow from this computer' and tap 'OK'.
[+] ADB device connected.
--- [EDL Setup] Rebooting to EDL Mode ---
[*] Attempting to reboot device to EDL mode via ADB...
[+] Reboot command sent. Please wait for the device to enter EDL mode.
[*] Waiting for 10 seconds for device to enter EDL mode...
--- [EDL Setup] Waiting for EDL Loader File ---
[+] Loader file 'xbl_s_devprg_ns.melf' found in 'image'.
--- WAITING FOR EDL DEVICE ---
[*] Checking for Qualcomm EDL (9008) device...
[!] No Qualcomm EDL (9008) device found.
[!] Please connect your device in EDL mode.
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[*] Waiting for Qualcomm EDL (9008) device... (Press Ctrl+C to cancel)
[+] EDL device connected on COM8.
--- [EDL Setup] Device Connected ---
[*] Uploading programmer via QSaharaServer to COM8...
Error executing command: C:\LTBox-win_amd64-v2.0.4\tools\Qsaharaserver.exe -p \\.\COM8 -s 13:C:\LTBox-win_amd64-v2.0.4\image\xbl_s_devprg_ns.melf
Return code: 1
[!] FATAL ERROR: Failed to load Firehose programmer.
[!] Possible causes:
1. Connection instability (Try a different USB cable/port).
2. Driver issue (Check Qualcomm HS-USB QDLoader 9008 in Device Manager).
3. Device is hung (Hold Power+Vol- for 10s to force reboot, then try again).
[!] Warning: Programmer loading issue (might be already loaded): Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\Qsaharaserver.exe', '-p', '\\\\.\\COM8', '-s', '13:C:\\LTBox-win_amd64-v2.0.4\\image\\xbl_s_devprg_ns.melf']' returned non-zero exit status 1.
[*] Extended dump targets: devinfo, persist, boot_a, vbmeta_system_a
[*] Preparing to dump 'devinfo'...
> Found info in rawprogram4.xml: LUN=4, Start=677222
[*] Dumping -> LUN:4, Start:677222, Num:1...
[!] Error executing fh_loader: Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\fh_loader.exe', '--port=\\\\.\\COM8', '--convertprogram2read', '--sendimage=devinfo.img', '--lun=4', '--start_sector=677222', '--num_sectors=1', '--memoryname=UFS', '--noprompt', '--zlpawarehost=1']' returned non-zero exit status 1.
[!] Failed to read 'devinfo': Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\fh_loader.exe', '--port=\\\\.\\COM8', '--convertprogram2read', '--sendimage=devinfo.img', '--lun=4', '--start_sector=677222', '--num_sectors=1', '--memoryname=UFS', '--noprompt', '--zlpawarehost=1']' returned non-zero exit status 1.
[*] Waiting 5 seconds for stability...
[*] Preparing to dump 'persist'...
> Found info in rawprogram0.xml: LUN=0, Start=81800
[*] Dumping -> LUN:0, Start:81800, Num:8192...
[!] Error executing fh_loader: Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\fh_loader.exe', '--port=\\\\.\\COM8', '--convertprogram2read', '--sendimage=persist.img', '--lun=0', '--start_sector=81800', '--num_sectors=8192', '--memoryname=UFS', '--noprompt', '--zlpawarehost=1']' returned non-zero exit status 1.
[!] Failed to read 'persist': Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\fh_loader.exe', '--port=\\\\.\\COM8', '--convertprogram2read', '--sendimage=persist.img', '--lun=0', '--start_sector=81800', '--num_sectors=8192', '--memoryname=UFS', '--noprompt', '--zlpawarehost=1']' returned non-zero exit status 1.
[*] Waiting 5 seconds for stability...
[*] Preparing to dump 'boot_a'...
> Found info in rawprogram4.xml: LUN=4, Start=112006
[*] Dumping -> LUN:4, Start:112006, Num:24576...
[!] Error executing fh_loader: Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\fh_loader.exe', '--port=\\\\.\\COM8', '--convertprogram2read', '--sendimage=boot_a.img', '--lun=4', '--start_sector=112006', '--num_sectors=24576', '--memoryname=UFS', '--noprompt', '--zlpawarehost=1']' returned non-zero exit status 1.
[!] Failed to read 'boot_a': Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\fh_loader.exe', '--port=\\\\.\\COM8', '--convertprogram2read', '--sendimage=boot_a.img', '--lun=4', '--start_sector=112006', '--num_sectors=24576', '--memoryname=UFS', '--noprompt', '--zlpawarehost=1']' returned non-zero exit status 1.
[*] Waiting 5 seconds for stability...
[*] Preparing to dump 'vbmeta_system_a'...
> Found info in rawprogram0.xml: LUN=0, Start=5857672
[*] Dumping -> LUN:0, Start:5857672, Num:16...
[!] Error executing fh_loader: Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\fh_loader.exe', '--port=\\\\.\\COM8', '--convertprogram2read', '--sendimage=vbmeta_system_a.img', '--lun=0', '--start_sector=5857672', '--num_sectors=16', '--memoryname=UFS', '--noprompt', '--zlpawarehost=1']' returned non-zero exit status 1.
[!] Failed to read 'vbmeta_system_a': Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\fh_loader.exe', '--port=\\\\.\\COM8', '--convertprogram2read', '--sendimage=vbmeta_system_a.img', '--lun=0', '--start_sector=5857672', '--num_sectors=16', '--memoryname=UFS', '--noprompt', '--zlpawarehost=1']' returned non-zero exit status 1.
[*] Waiting 5 seconds for stability...
[*] Resetting device to system...
[*] Resetting device via fh_loader on COM8...
Error executing command: C:\LTBox-win_amd64-v2.0.4\tools\fh_loader.exe --port=\\.\COM8 --reset --noprompt
Return code: 1
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
AN ERROR OCCURRED: Process Halted.
Error details: Command '['C:\\LTBox-win_amd64-v2.0.4\\tools\\fh_loader.exe', '--port=\\\\.\\COM8', '--reset', '--noprompt']' returned non-zero exit status 1.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
드라이버 지우고 다시 깔아봐 Wwan으로
그것도 해봤는데 안됨
나도 같은 문제로안됨 ㅠㅠ