https://www.cpuid.com/softwares/hwmonitor.html
The PEX error counter counts the transfers from L0 to Recovery. It triggers for example during a change in speed, in width, and several other possible reasons that do not (always) mean that a PCIe error occured. On the contrary, the other counters must stay at 0, if they don't this means that there is truly a PCIe error (in a lot of case, this can mean an incompatibility between the mainboard and the graphics card).
PCIe PEX 오류 카운터는 L0에서 Recovery까지의 전송 횟수를 측정합니다. 예를 들어 전송 속도, 대역폭의 변동을 비롯하여 여러 가지 이유로 인해 발할 수 있지만, 이게 무조건 PCIe에 에러가 발생했다는 의미는 아닙니다.
반대로, 다른 항목의 수치는 0으로 유지되어야 합니다. 그렇지 않으면 실제로 PCIe 상의 에러가 발생했음을 의미합니다. 대부분의 경우 메인보드와 그래픽 카드 간의 호환성 문제를 의미할 수 있습니다.
요약:리커버리 카운트는 신경 꺼도 되고, 나머지 항목에서 0 이외의 다른 수치가 나오면 VGA, 메인보드, 라이저케이블 등의 점검이 필요할 수 있음.
ㅇㅇ 나도 전에 검색할때 이거 봤던것 같음 그래서 리커버리가 아닌 카운트라 실사용 멀쩡해도 무시하면 안될것 같아서 막 하나씩 소거법으로 찾아냈었음 ㅋㅋ