์–ด๋–ค์ƒˆ๋ผ๊ฐ€ 2.0 3.0 ๋”ฐ๋ผ์„œ
๊ฐ๋„๊ฐ€ ๋‹ค๋ฅด๋‹ค ํ•ด์„œ

3.0์ด๋ฉด ๋ธ”๋ฃจํˆฌ์Šค์™€ ๊ฐ„์„ญ
๊ทธ๋ž˜์„œ 2.0 ์“ฐ๋Š”๊ฒŒ ๋งž๋Š”๋ฐ
3.0์ด ๋Š๊ธฐ๋Š” ๊ฒŒ ์•„๋‹ˆ๊ณ 
๊ฐ๋„๊ฐ€ ๋‹ค๋ฅด๋‹ค๋Š” ๋ณ‘์‹ ์€
๋ฌด์Šจ ์‹ ๋ฐ•ํ•œ ๊ฐœ์†Œ๋ฆฐ๊ฐ€

์‹ถ์–ด์„œ ๊ตฌ๊ธ€ํ•˜๋‹ˆ๊นŒ
1์ดˆ๋งŒ์— ๋‚˜์˜ด

it all depends on your motherboard USB controllers, it doesnt matter usb 2.0 or 3.0, mouses doesnt generate 60MB/s of data, and 8Khz is the limit of all USB currently on the market

USB 2.0 controllers tops at 480mbps 8Khz

USB 3.1 Gen 1 (old 3.0) tops at 5gbps 8Khz

USB 3.1 Gen 2 (old 3.1) tops at 10gbps 8Khz

USB generation means nothing to polling rate, what matters is how loaded the USB controller on the MoBo is.

usb 2 3 ๋ชจ๋‘ 8k๊นŒ์ง€ ๋Œ๋ ค๋„
์ด๋ฏธ 8k๊นŒ์ง€ ๋‘˜๋‹ค ์ง€์›ํ•˜๋ฏ€๋กœ
๋‹ค๋ฅผ ์ˆ˜๊ฐ€ ์—†๋‹ค๋Š” ๊ฑฐ์ž„

๊ทธ๋Ÿผ ๋ญ๊ฐ€ ๋ฌธ์ œ๋ƒ?

He can use USB Device Tree Viewer to check controllers, their hubs and devices connected. Mice should be alone connected to one USB hub.

๋งˆ๋”๋ณด๋“œ ์ œ์›ํ‘œ๋ฅผ ๋ณด๊ฑฐ๋‚˜
USB ๋””๋ฐ”์ด์ŠคํŠธ๋ฆฌ๋ทฐ์–ด
๋ผ๋Š” ๊ฑธ ๋Œ๋ ค์„œ
USB ์—ฐ๊ฒฐ์„ ๋ณด๋ฉด ๋œ๋‹ค
๋ผ๋Š” ๊ฑฐ์ž„

USB ํฌํŠธ ์—ฌ๋Ÿฌ ๊ฐœ๊ฐ€
๋งˆ๋”๋ณด๋“œ์˜ 1๊ฐœ ํฌํŠธ์—
๊ณต์œ  ์—ฐ๊ฒฐ๋˜๋ฉด
์ฐจ์ด๊ฐ€ ๋‚œ๋‹ค๋Š” ๊ฑฐ์ž„

Most USB2 ports are routed to the PCH 1st, then to the CPU, and some USB 3 ports are wired directly to the cpu, that changes from board to board, you would have to check each mobo documentation to see what port is routed directly to the cpu and plug only you mouse to that

Pluggin to a usb 3 port wired to the CPU avoid one hop in the mouse data, saving a couple of microsseconds

๋ณดํ†ต USB 2.0์€
์—ฌ๋Ÿฌ ํฌํŠธ๊ฐ€ ํ•œ ๋‹ค๋ฆฌ
๋‹ค ๊ฑฐ์ณ์„œ ๋“ค์–ด๊ฐ€๊ณ 
USB 3.0์€
CPU์— ์ง๊ฒฐ๋œ ๊ฒฝ์šฐ๊ฐ€
๋งŽ์•„์„œ ์ƒํ™ฉ์— ๋”ฐ๋ผ
๋ช‡ ๋ฐ€๋ฆฌ์ดˆ ์ฐจ์ด๊ฐ€
๋‚  ์ˆ˜ ์žˆ๋‹ค๊ณ  ํ•จ

๋ฌผ๋ก  ๋Œ€์‹  3.0์€
๋ธ”๋ฃจํˆฌ์Šค ์žฅ๋น„๊ฐ€ ๋งŽ์œผ๋ฉด
๊ฐ„์„ญ์ด ์ƒ๊น€

์•Œ๊ฒ ๋ƒ ์ƒˆ๋ผ๋“ค์•„
๊ตฌ๊ธ€์ข€ ์จ๋ผ
1์ดˆ๋งŒ์— ๋‚˜์˜ค๋Š” ๊ฑธ ์”จ๋ฐœ

- dc official App