https://github.com/retrofw/retrofw.github.io/wiki/Install-Firmware
Make sure you download the appropriate release for your device. Here's a chart to help you figure out which release is right for you. RS-97 consoles use the board revision printed on the motherboard. LDK systems are identified by the form factor of the system. RG-300 units are identified by whether the screen is bright or dim.
| Device | Firmware type |
|---|---|
| RS-97 v1.0 | Type 1A |
| RS-97 v1.0 S | Type 1A or Type 1B |
| RS-97 v2.0 | Type 2A |
| RS-97 v2.1 | Type 2A or Type 2B |
| RG_PLUS v1.x | Type 2B |
| RS-97 v3.0 | Type 3B |
| RS-97 Plus (60Hz) | Type 3B |
| RG-300 (Bright screen) | Type 3B |
| RG-300 (Dim screen) | Type 2B |
| RG-300 IPS | Type 5B |
| RS-97 Plus Anniversary | Type 5B |
| RS-97 Plus IPS | Type 5B |
| Retro Arcade Mini . | Type 4B |
| LDK (Horizontal) | Type 2A |
| LDK (Square) | Type 2B |
RetroFW 2.3 uses lower RAM CAS Latency than 2.2 releases. We provide images without this feature, download the ones with CL6 in the name.
To install the firmware follow the usual procedure
| Screen / Image Name | Device |
|---|---|
| A030JTN01 | Retro Game v1.0, Retro Game v2.0, Retro Game v1.0 S |
| EJ030NA09B | Retro Game v2.1, LDK (Horizontal and Vertical), Retro Game v2.1 B, Retro Game v3.0 B, Retro Game 300 |
| LKWY030A01 | Retro Game v3.0 B, Retro Game Plus (60Hz), Retro Game 300 |
| Y030XX067A | Retro Game Plus Anniversary Edition, RG300 IPS, Retro Game+ IPS |
| TM370LN4309 | Retro Arcade 4.3v1.3 |
| TM370LN4309-PAPK3 | PAP KIII Plus |
| TM370LN4309-PAPG2 | PAP Gameta II Plus (initial release) |
댓글 0