마이크로 USB는 5개 핀배열로 이루어지는데 접지를 위한 GND 단자가 있음에도, 왜 nc (not connected) 단자를 더 접지시키는지 왜 굳이 5개 핀으로 만드는건지 잘 모르겠습니다.
혹시 아시는분 계신가요?
댓글 6
It's for On-The-Go, to select which device is the host or slave.
guest5(203.246)2015-05-27 13:26
OTG adds a fifth pin to the standard USB connector, called the ID-pin; the micro-A plug has the ID pin grounded, while the ID in the micro-B plug is floating.
guest5(203.246)2015-05-27 13:27
제조사 마다 다른데 어떤데선 그라운드랑 합쳐서 ID 인식용으로 조합해 쓰거든.
programmer(successor)2015-05-27 13:27
device 모드일땐 걍 open 이고, host 모드일땐 gnd 랑 short 시킬거야. 내기억이 맞다면.
It's for On-The-Go, to select which device is the host or slave.
OTG adds a fifth pin to the standard USB connector, called the ID-pin; the micro-A plug has the ID pin grounded, while the ID in the micro-B plug is floating.
제조사 마다 다른데 어떤데선 그라운드랑 합쳐서 ID 인식용으로 조합해 쓰거든.
device 모드일땐 걍 open 이고, host 모드일땐 gnd 랑 short 시킬거야. 내기억이 맞다면.
사스가 게시판값 하는곳이군요. 제생각이 맞았네용. 답변 고맙습니당!!!!!!
http://dblack.tk
커뮤니티 사이트 입니다 많은 이용 부탁 드립니다.