벨카7 전면 알루미늄 패널에 스티커 커스텀해서 붙이게 도면 요청했었거든
I am not able to provide any drawings but the front area of the panel excluding the cut edges is 109.0 mm x 301.0 mm. The power button has an outside diameter of 16 mm, centered horizontally. The middle of the power button is 10.8 mm above the start of the bottom edge, so your sticker would need a hole 10.8 mm from its bottom edge.
도면은 못주고 사이즈만 알려줬는데 라운딩도 안알려주고 애매한거같네..
케이스 받아서 실측해야될듯
I am not able to provide any drawings but the front area of the panel excluding the cut edges is 109.0 mm x 301.0 mm. The power button has an outside diameter of 16 mm, centered horizontally. The middle of the power button is 10.8 mm above the start of the bottom edge, so your sticker would need a hole 10.8 mm from its bottom edge.
도면은 못주고 사이즈만 알려줬는데 라운딩도 안알려주고 애매한거같네..
케이스 받아서 실측해야될듯
댓글 1