a04424ad2c06782ab47e5a67ee91766dc28ff1ecd0acc4c9bf10d5c758d3d7211c51d28a6bfec3eda8e5e9a4544d7a

As shown in Fig. 2, the synthesized samples uniformly exhibit a coppery surface color. However, upon
inspecting the cross-section, the interior of the samples consistently appears with a silver-gray color.
We would recommend measuring the dark-gray or silver-gray region rather than the surface when
conducting I-V measurements. Table 1 shows the size of each sample and the copper plate


에서 겉에 구리색의 금속부분이 아니라 안쪽 은회색 부분에 IV 측정하는걸 추천한다고 하셨고

It should be noted that this flat slope was confirmed in the dark-gray
part of sample #6. The surface of the sample was relatively smooth and was confirmed to conduct
electricity well.


6번 샘플은 샘플표면의 어두운 회색 지역에서 측정하셨다고 하셨는데


5번 샘플자료는 금속 부분에서 측정하신건지 궁금합니다.


또 금속부분이나 회색부분이나 동일하게 초전도성을 가진다고 보시는건지, 아니면 금속부분이 초전도성을 저해한다고 보시는건지

만약 금속부분이 불필요하다고 판단하셨다면 왜 표면을 제거하는 등의 후처리는 추천하지 않으셨는지 궁금하고 

샘플 3,7은 측정치가 애매해서 자료에 포함하지 않으신건지 궁금합니다.


We will release our research
content to include results such as temperature dependence, ZFC-FC, and M vs H measurements soon

후속논문이 기대되네요ㅎㅎ