*There are older ski bindings/ski boots without marking. Here the technician needs to check boot compatibility according to the corresponding tech manual.
**The screwdriver icon indicates that the toe height needs to be adjusted by the technician. Although there is no Type A and C standard in ISO 9523, MN bindings are marked with A to avoid possibly installing a Type C Alpine or Walk boot in those bindings.
***The boot needs to have tech inserts. Compatibility with tech bindings might be limited. Check the recommendations of the binding and boot manufacturer.
****Compatibility with tech bindings might be limited. Check the recommendations of the binding and boot manufacturer.
A는 어덜트 C는 칠드런
도라이버는 알파인솔, 그립워크 전환시 앞쪽 조절이 필요한 바인딩인듯?
최근 MNC 바인딩이란걸 보신 분? WTR이 사장되면서 그냥 똑같은 바인딩에 그립워크 로고를 달게 된 것이 아닐까?
그냥 그립워크 로고 하나만 박아놓으면 구분하기 존나 편한데 뭐저렇게 어렵게 가는지 모르겠네
6,7년전 이야기고 부츠고 바인딩이고 걷기 편한 규격 = 그립워크로 다 통일된듯
@ㅇㅇ(175.223) 그냥 그립워크로 안만드는곳 있으면 앞으로 소비안해주면된다. 선수지급용은 지들끼리알아서하고