10์ดˆ๋ˆŒ๋Ÿฌ์„œ ์ „์›๋„๊ธฐ
๋ณผ๋ฅจ๋‹ค์šด+...๋ฒ„ํŠผ+ํŒŒ์›Œ๋ฒ„ํŠผ
๋ณผ๋ฅจ๋‹ค์šดํ•˜๊ณ  ... ๋ˆ„๋ฅธ์ฑ„๋กœ ์žˆ๋‹ค๊ฐ€ ํŒŒ์›Œ๋ฒ„ํŠผ ๋–ผ๋ฉด๋จ


Getting this to work is a little tricky:

Shut the unit down, either from the OS or by holding power button for 10 seconds.

Check that the unit is off. Trackpads should have no haptic feedback.

While holding the volume- and โ€œโ€ฆ.โ€ buttons, press the power button once.

Keep holding volume- and โ€œโ€ฆ.โ€ during the power button press and a few seconds after that, then let go.

If this doesn't work for you, then this works best if you disconnect the battery internally to the Steam Deck and then do the combination while plugging in the USB power when holding down the buttons.

The steps would be:

Shut down the Steam Deck and disconnect the battery internally

Check that the unit is off. Trackpads should have no haptic feedback.

While holding the volume- and โ€œโ€ฆ.โ€ buttons, plug in the USB power, press the power button once.

Keep holding volume- and โ€œโ€ฆ.โ€ during the power button press and a few seconds after that, then let go.

When you hear the first beep/chime start you may be able to hold the volume+ button and go into the BIOS.

- dc official App