대우 정밀 산업 K2


대우 정밀 공업 K2 돌격 소총은 한국 방위청이 개발했으며 S & T Motiv (구 대우 정밀 산업)에서 제조되었습니다. 그것은 현재 대한민국 군대의 표준 서비스 소총이다. 숄더 발사 및 가스 작동 K2는 5.56 × 45mm NATO 및 0.223 레밍턴 탄약을 발사 할 수 있습니다. K2는 1984 년에 채택 된 이후 한국군에 대한 M16A1 돌격 소총을 대신했습니다.


K1이 K2보다 3 년 앞서 서비스를 시작했지만 K2 돌격 소총의 개발은 수년 전부터 시작되었습니다. M16A1 (콜트 모델 603K) 생산의 최종 면허가 만료됨에 따라, 국방 자체를 강력하게 믿는 박정희 (Park Chung-hee) 대통령은 원주민 표준 군사 무기의 개발을 명령했다. 국방 과학 연구소의 엔지니어들은 1972 년에 XB 소총이라는 프로젝트를 시작하여 1983 년 K2 돌격 소총을 탄생 시켰습니다.


K2가 채택 된 후, 거의 30 년 동안 총을 거의 변경하지 않았습니다. 한국 육군은 보병 무기와 전술을 근대화하는 데 드는 돈과 긴급을 덜 탕진하면서 오래 전부터 북한의 위협에 맞서 탱크와 포병을 선호하는 냉전 스타일의 사고 방식을 유지했다. 제조 업체는 1970 년대 이후 매년 수만 대의 소총을 생산해 왔으며, 업그레이드를 요구하지 않은 국내 고객을위한 경쟁없이 변경을 할 동기가 없습니다. 다양한 관리 및 소유권 변경으로 내부 혼란이 발생하여 연구 개발을 수행하기가 어려웠습니다. 특수 부대는 새로운 광학 장치와 액세서리로 K 시리즈 무기를 업그레이드해야 할 필요성이 더 많았으므로 민간 기업으로 전환하여 추가 레일 시스템을 개발했습니다. 그들은 여러 회사의 많은 비표준 레일을 공급 받았기 때문에 정규 육군은 2013 년에 MIL-STD-1913 레일을 PVS-11K 빨간 도트 사이트로 표준화했습니다. K2는 상단 수신기의 짧은 레일입니다. 그것은 수신기에 장착 된 광학 마운트로 만들어지기 때문에 일반 군대는 추가 레일을 필요로하지 않습니다. [5]


K2와 K1A는 2000 년 이후 국제 시장에서 구식이되었습니다. 악세사리를 추가 할 능력이 부족한 것 외에도 K1A는 개인 방어용 무기 또는 특별 작전 기병 부대만큼 크고 힘이 부족하고 인간 공학적이지 못했으며 K2는 너무 길었습니다. 2012 년에 S & T Motiv는 K2C 또는 K2 카빈총을 선보였습니다. 조절 식 가스 피스톤, 탈착식 후면 백업 시준 장치, 4 방향 레일 핸드 가드가있는 플랫 탑 수신기 및 오른쪽 접이식 M4 스타일 수축식 스톡이 포함 된 단축 형 13.5 인치 (340mm) 배럴이 있습니다. 무게는 3.3kg (7.3lb)이며, 재고가있는 경우 길이가 875mm (34.4 인치)이고 접을 경우 570mm (22 인치)입니다. K2C는 1980 년대에 일반 보병에 적합한 카빈총으로 간주되지 않는 소형 무기 개념에 대한 계속되는 주장 때문에 한국군에 의해 채택되지는 않았지만 수출 판매를 보았습니다.


국내 매력을 높이기 위해 S & T Motiv는 나중에 플랫 탑 리시버, M4 스타일 조절 가능 재고 및 옵션 레일 손 가드를 포함한 K2C 업그레이드를 활용하면서 총검 길이 (K2C1)를 유지하는 K2C1을 제작했습니다. 2016 년 현재, 현역 군대와 소규모로 근무하고 있습니다. 부분적으로 레일의 나사 부착 방법으로 인해 K2C1은 원래 모델 (3.684kg (8.12lb) 대 3.37kg (7.4lb))보다 약간 무거 우므로 레일이 특별히 레일을 거부하여 과열되는 경향이 있습니다.


6 가지 프로토 타입이 XB 개발 중에 만들어졌습니다. 6 가지 디자인 중 XB6가 선택되었습니다. XB6의 일부는 서프 레서 및 명소와 같은 FN FNC와 유사합니다. XB6의 추가 개발은 XB7로 발전했으며 XB7C (XK2라고도 함)로 발전했습니다. 외관상으로는 AR18과 외관이 비슷하지만, K2는 전완, 권총 - 손잡이 및 측면 접이식 buttstock 용 폴리머를 사용합니다. 화재 통제 시스템과 볼트 캐리어 그룹은 미국 M16 소총에서 파생되었지만 [6], 볼트와 캐리어를 포함한 부품 중 일부는 M16과 호환됩니다. 가스 작동 시스템은 AKM에서 파생됩니다. K2는 M16과 동일한 잡지를 사용합니다. 배럴당 총알은 6 개의 그루브를 가지고 있으며, 1 in-7.3 right hand twist. K2에는 3 가지 선택 분사 모드가 있습니다 : 반자동, 3 라운드 버스트 및 완전 자동.


K2는 DPI K201을 장착 할 수 있습니다. DPI K201은 미국 M203 이후에 패터닝 된 40 × 46mm 단발 유탄 발사기입니다. 대한민국 군대는 원래 K2 전체를 새로운 S & T 대우 K11 이중 배럴 공중 버스트 무기로 교체 할 계획이었습니다. 그러나 20mm 수류탄의 효과적인 화력에 대한 높은 비용과 회의론은 2 척의 척탄 병을 유지하면서 각 팀에 2 개의 K11을 제공하기로 결정했습니다. 결과적으로 대한민국 군대의 표준 9 인 보병 대대에는 현재 K2 소총 2 대, K201 유탄 발사기 2 대, 2 대의 K11 DAWs, 1 대의 K3 경비원 건, 나머지 1 대가 K1 또는 K2 .


K2는 또한 지정된 Marksman Rifle과 비슷한 역할로 bipod 및 4x 확대 스코프와 함께 사용되기도합니다. K2와 K1을 액세서리로 만드는보다 현대적인 방법은 현재 제한된 표준 문제 인 PVS-4K 레일 통합 시스템을 장착하는 것입니다. 광학 / 적색 도트 및 야간 투시경을위한 길고 연속적인 레일과 밑면과 양면에 위치한 세 개의 다른 레일로 구성된 알루미늄 바디로 구성됩니다. 레일은 Picatinny 타입입니다.


---


Daewoo Precision Industries K2 assault rifle was developed by the South Korean Agency for Defense Development and manufactured by S&T Motiv (formerly Daewoo Precision Industries). It is currently the standard service rifle of the Republic of Korea Armed Forces. Shoulder-fired and gas-operated, the K2 is capable of firing both 5.56×45mm NATO and .223 Remington ammunition. The K2 supplanted the M16A1 assault rifle for the Republic of Korea Armed Forces since its adoption in 1984.[4]


Although the K1 entered service 3 years before the K2, the development of the K2 assault rifle started many years earlier. Facing the eventual expiration of the Republic of Korea's license to produce the M16A1 (Colt Model 603K), president Park Chung-hee, who strongly believed in self-reliance in national defense, ordered the development of an indigenous standard military firearm. Engineers with the Agency for Defense Development began the project named XB rifle in 1972, resulting in the K2 assault rifle in 1983.


K2C[edit]

After the K2 was adopted, hardly any changes were made to the gun for nearly 30 years. There were several reasons for this: the ROK Army maintained a Cold War-style mentality that favored tanks and artillery against an outdated North Korean threat, leaving less money and urgency to modernize infantry weapons and tactics; the manufacturer had been producing tens of thousands of rifles each year since the 1970s without competition for domestic customers that didn't request upgrades, leaving no motivation to make changes; and various management and ownership changes created internal chaos making it difficult to conduct research and development. Special forces units had more of a need to upgrade K-series weapons with new optics and accessories, so they turned to private companies to develop add-on rail systems. Because they were being supplied many non-standard rails from various companies, the regular ROK Army standardized the MIL-STD-1913 rail in 2013 for the PVS-11K red dot sight, which on the K2 is only a short rail on the upper receiver, since it is made with an optics mount on the receiver to attach it and regular troops have less of a need for additional rails.[5]


The K2 and K1A had become outdated for international markets after 2000; in addition to lack of ability to add accessories, the K1A had become too large, underpowered, and un-ergonomic as a personal defense weapon or special operation carbine, and the K2 was too long. In 2012, S&T Motiv introduced the K2C, or K2 carbine. It has a shortened 13.5 in (340 mm) barrel with adjusted gas piston, detachable rear backup sight, flattop upper receiver with 4-way rail handguard, and right side-folding M4-style retractable stock; it weighs 3.3 kg (7.3 lb), is 875 mm (34.4 in) long with stock extended and 570 mm (22 in) with stock folded. The K2C has not been adopted by ROK forces, owing to continued insistence on 1980s-era small arms concepts that do not deem carbines appropriate for general infantry, but it has seen export sales.[5]


To enhance domestic appeal, S&T Motiv later created the K2C1, which retains the full-length K2's features (including bayonet lug) while utilizing the K2C's upgrades including a flattop upper receiver, M4-style adjustable stock, and optional rail handguard; as of 2016, it is in service in small numbers with front line troops. Partially due to the rail's screw attachment method, the K2C1 is slightly heavier than the original model (3.684 kg (8.12 lb) vs. 3.37 kg (7.4 lb)), and the rail tends to overheat due to the Army specifically refusing to have rail guards or vertical foregrips supplied with the rifles for inability to "comply with current bayonet fighting training manuals."[5]


Six different prototypes were made during the XB development. Of the 6 designs, the XB6 was selected. Some parts of the XB6 resembled FN FNC such as the suppressor and sights. Further development of the XB6 evolved into the XB7 and finally the XB7C, also known as the XK2. Externally similar in appearance to the AR18, the K2 uses polymer for the forearm, pistol-grip and side-foldable buttstock. The fire control system and bolt carrier group are derived from the American M16 rifle,[6] but few of the parts, including the bolt and carrier, are interchangeable with the M16. The gas operating system is derived from the AKM. The K2 uses the same magazine as the M16. The barrel rifling has 6 grooves, 1-in-7.3 right hand twist. The K2 has 3 selective firing modes: semi-auto, 3-round burst, and full automatic.


The K2 can be equipped with the DPI K201, an undercarried 40×46mm single shot grenade launcher patterned after the American M203.[1] The Republic of Korea Armed Forces originally planned to replace the entire K2 with new S&T Daewoo K11 dual-barrel air-burst weapon. However, high cost and skepticism over the effective firepower of the 20mm grenade led to the decision to provide 2 K11s to each squad, keeping 2 grenadiers as well. Consequently, the standard 9-person infantry squad of the Republic of Korea Armed Forces is currently equipped with 2 K2 rifles, 2 K2 rifles with K201 grenade launcher, 2 K11 DAWs, 1 K3 light machine gun, and the rest with either K1 or K2.


The K2 is also sometimes used with bipods and 4× magnification scopes, in a role similar to the Designated Marksman Rifle. A more modern way to accessorize the K2 and K1 is to mount a now (limited) standard issue PVS-4K Rail Integration System. It consists of an aluminum body with a long, uninterrupted rail for optical/red-dot and night-vision sights and three other rails located on the bottom and both sides. The rails are of the Picatinny-type.



***


위키피디아 k-2항목 일부를 그대로 복사해서 붙여넣었음.


4~5년 내에 번역가들은 소설외엔 할 일 없을지도?